Institut de Chimie Moléculaire et des Matériaux d'Orsay

Vincent Ji

Professeur
Bât. 410, bureau 357 – SP2M – ICMMO
Université Paris-Sud
15, rue Georges Clémenceau
91405 Orsay Cedex
FRANCE

+33 1 69 15 63 18
vincent.ji@u-psud.fr

Teaching: Head of Materials Science Department (from 2007 to 2014), professional education responsible (since 2015) of PolyTech Paris-Sud, The Engineering Institute of Université Paris-Sud  (http://www.polytech.u-psud.fr ), intervention on

* Atomic defects and diffusion                                       * High temperature corrosion

* Composite materials                                                   * X-ray diffraction and residual stress analysis

* Coatings and thin films for mechanical applications   * Residual stress and their determination

Main Research Topics in ICMMO/SP2M – Associated Research Institute with CNRS (Centre National des Recherche Scientifiques) at Université Paris-Sud (UPSud) (http://www.icmmo.u-psud.fr/Labos/SP2M)

With more then 250 papers in international journals, 120 contributions in conferences, direction or co-direction of 20 Ph.D thesis, participation of 18 another Ph.D thesis with common publications, direction of 23 Masters thesis, the main scientific research themes are

* Methodology development of X-ray diffraction residual stress analysis in heterogeneous materials (materials with properties gradient, multiphase materials etc…);

* Study of relationship between microstructure evolution, material processing and internal stress (surface science, thin films, surface treatment etc…) by experimentation and by numerical modelization

* Oxidation kinetics and diffusion mechanism of alloys and metals at high temperature

All the research works are realized in collaboration with different academic or industrial partners in France, in Europe and in Asia (China and Japan)

University Degrees :

2003, HDR (Habilitation à diriger des Recherches) « Physics Science », Université Lille 1 (http://www.univ-lille1.fr/recherche/Laboratoires-Equipements?id=4590&type=labos), under the direction of Professor Jacques Foct

1989, PhD Thesis « Mécanique et Matériaux », Arts et Métiers ParisTech (Paris, http://www.ensam.eu/fr/centres_et_instituts/centre_paris ), under the direction of Professor Gérard Maeder

1986, Master « Métallurgie Spéciale et Matériaux » INSTN (Saclay, http://www-instn.cea.fr/formations/diplomes-et-titres/liste-des-diplomes-et-titres/m2-materiaux-pour-l-energie-et-le-transport-met,35.html) -Université Paris-Sud (Orsay), under the direction of Professor Anne-Marie Huntz

1984, Engineer «Materials Science and Engineering », Beijing University of Aeronautics and Astronautics (Beijing, China, http://www.mse.buaa.edu.cn/)

Professional Cursus

* Full Professor (from 2007 to 2016) and Distinguished Professor since 2016 at UPSud/ICMMO (Institut de Chimie Moléculaire et Matériaux d’ORSAY) for scientifique research and with PolyTech Paris-Sud (The Engineering Institute of Univ. Paris-Sud) for teaching

* 2004-2015, External Collaborator with Laboratoire Léon-Brillouin (http://www-llb.cea.fr/index.php), French Neutron facility co-managed by CNRS (Centre National des Recherches Scientifiques) and CEA (Commissariat d’Energie Atomic) at Saclay for residual stress analysis by Neutron

* October 1994 to July 2007, Assistant Professor (maître de conférences) at Arts et Métiers ParisTech (Ecole Nationale Supérieure d’Arts et Métiers), Paris

* October 1991- September 1994: Research Engineer at SERAM, Paris

* September 1989-September 1991: Assistant at Arts et Métiers ParisTech, Paris

 

Recent publications

Prediction of the terminations and Miller planes of the tetragonal zirconia thin films as a gate dielectric layer in integrated-circuit industry. Y. Zhang, H.-X. Chen, L. Duan, L. Ni, J.-B. Fan, Z. Wang, V. Ji, Surface and Interface Analysis, 2019, 0

Studying the insulating characters of cubic ZrO2 slabs with nine terminations within three lower index Miller planes (001), (110) and (111). Y. Zhang, H.-X. Chen, L. Duan, J.-B. Fan, L. Ni, Z. Wang, H. Li, V. Ji, Microelectronic Engineering, 2019, 213, 77-85

Surface layer characteristics of SAF2507 duplex stainless steel treated by stress shot peening. M. Chen, C. Jiang, Z. Xu, V. Ji, Applied Surface Science, 2019, 481, 226-233

Influences of Al and Ti particles on microstructure, internal stress and property of Ni composite coatings. Y. Zhao, L. Wang, Y. Sun, H. Liu, C. Jiang, V. Ji, W. Li, Journal of Alloys and Compounds, 2019, 793, 314-325

Cube orientation bands observed in largely deformed Al-Sc alloys containing shearable precipitates. C.-Y. Dan, Z. Chen, G. Ji, S.-Y. Zhong, J. Li, X.-R. Li, F. Brisset, G.-A. Sun, H.-W. Wang, V. Ji, Scripta Materialia, 2019, 166, 139-143

Laser cladding of Ni based powder on a Cu-Ni-Al glassmold: Influence of the process parameters on bonding quality and coating geometry. F. Bourahima, A.-L. Helbert, M. Rege, V. Ji, D. Solas, T. Baudin, Journal of Alloys and Compounds, 2019, 771, 1018-1028

Investigation on microstructure and properties of Al18B4O33 whisker reinforced AlMgSi matrix composite after shot peening. H. Liu, M. Chen, L. Wang, K. Zhan, V. Ji, C. Jiang, Vacuum, 2019, 160, 303-310

Experimental study of the mechanisms of nanoparticle influencing the fatigue crack growth in an in-situ TiB2/Al-Zn-Mg-Cu composite. Y. Ma, J. Geng, Z. Chen, M. Wang, D. Chen, G. Ji, V. Ji, H. Wang, Engineering Fracture Mechanics, 2019, 207, 23–35

Experimental study on macro- and microstress state, microstructural evolution of austenitic and ferritic steel processed by shot peening. M. Chen, C. Jiang, Z. Xu, K. Zhan, V. Ji, Surface and Coatings Technology, 2019, 359, 511-519

Residual stress and microstructure evolutions of SAF 2507 duplex stainless steel after shot peening. M. Chen, H. Liu, L. Wang, Z. Xu, V. Ji, C. Jiang, Applied Surface Science, 2018, 459, 155-163

Laser cladding of Ni based powder on a Cu-Ni-Al glassmold: Influence of the process parameters on bonding quality and coating geometry. F. Bourahima, A.-L. Helbert, M. Rege, V. Ji, D. Solas, T. Baudin, Journal of Alloys and Compounds, 2018, 771, 1018-1028

Investigations into the Surface Strain/Stress State in a Single-Crystal Superalloy via XRD Characterization. H. Duan, L. Qin, Y. Pei, S. Li, L.-D. Zhao, V. Ji, S. Gong, Metals, 2018, 8, 376

A comparison study of the Born effective charges and dielectric properties of the cubic, tetragonal, monoclinic, ortho-I, ortho-II and ortho-III phases of zirconia. Y. Zhang, H.-X. Chen, L. Duan, J.-B. Fan, L. Ni, V. Ji, Solid State Sciences, 2018, 81, 58-65

Investigation on the thermostability of residual stress and microstructure in shot peened SAF 2507 duplex stainless steel. M. Chen, H. Liu, L. Wang, Z. Xu, V. Ji, C. Jiang, Vacuum, 2018, 153, 145-153

Investigation on microstructure and properties of electrodeposited Ni-Ti-CeO2 composite coating. L. Wang, Y. Zhao, C. Jiang, V. Ji, M. Chen, K. Zhan, F. Moreira, Journal of Alloys and Compounds, 2018, 754, 93-104

Microstructure evolution and hot corrosion mechanisms of Ba2REAlO5 (RE = Yb, Er, Dy) exposed to V2O5 + Na2SO4 molten salt. L. Guo, C. Zhang, Q. He, J. Yu, Z. Yan, F. Ye, C. Dan, V. Ji, Journal of the European Ceramic Society, 2018, 38, 3555-3563

Simultaneously increasing strength and ductility of nanoparticles reinforced Al composites via accumulative orthogonal extrusion process. J. Liu, Z. Chen, F. Zhang, G. Ji, M. Wang, Y. Ma, V. Ji, S. Zhong, Y. Wu, H. Wang, Materials Research Letters, 2018, 6, 406-412

A comparison study of the structural and mechanical properties of cubic, tetragonal, monoclinic, and three orthorhombic phases of ZrO2. Y. Zhang, H.-X. Chen, L. Duan, J.-B. Fan, L. Ni, V. Ji, Journal of Alloys and Compounds, 2018, 749, 283-292

Cold rolling texture evolution of TiB2 particle reinforced Al-based composites by Neutron Diffraction and EBSD analysis. C.-Y. Dan, Z. Chen, M.-H. Mathon, G. Ji, L.-W. Li, Y. Wu, F. Brisset, L. Guo, H.-W. Wang, V. Ji, Materials Characterization, 2018, 136, 293-301

Investigation on surface layer characteristics of shot peened graphene reinforced Al composite by X-ray diffraction method. K. Zhan, Y. Wu, J. Li, B. Zhao, Y. Yan, L. Xie, L. Wang, V. Ji, Applied Surface Science, 2018, 435, 1257-1264

Hot corrosion behavior of TiO2 doped, Yb2O3 stabilized zirconia exposed to V2O5 + Na2SO4 molten salt at 700–1000°C. L. Guo, Z. Yan, J. Yu, C. Zhang, M. Li, F. Ye, V. Ji, Ceramics International, 2018, 44, 261-268

Evaluation of the residual stress and microstructure character in SAF 2507 duplex stainless steel after multiple shot peening process. M. Chen, H. Liu, L. Wang, C. Wang, K. Zhu, Z. Xu, C. Jiang, V. Ji, Surface and Coatings Technology, 2018, 344, 132-140

Surface layer characteristics of CNT/Al–Mg–Si alloy composites treated by stress peening. K. Zhu, C. Jiang, V. Ji, Surface and Coatings Technology, 2017, 317, 10-16

Microstructure study of cold rolling nanosized in-situ TiB2 particle reinforced Al composites. C.-Y. Dan, Z. Chen, G. Ji, S.-H. Zhong, Y. Wu, F. Brisset, H.-W. Wang, V. Ji, Materials & Design, 2017, 130, 357-365

Effect of the shot peening on the deformation of Al alloy component. X. Zhang, K. Liao, V. Ji, H. Chen, L. Hu, Surface Engineering, 2017, 0, 1-8

The Roles of Ti Particles in Improving the Corrosion Resistance of Electrochemically Assembled Ni-Ti Composite Coatings. Y. Zhao, L. Wang, Z. Qin, C. Wang, Z. Xu, C. Jiang, V. Ji, CORROSION, 2017, 73, 1107-1118

Structural, electronic, and magnetic properties of double perovskite Pb2FeReO6 thin films with (001) orientation and three possible terminations. Y. Zhang, L. Duan, V. Ji, Surface and Interface Analysis, 2017, 49, 960-966

Optimisation of microstructure and corrosion resistance of Ni-Ti composite coatings by the addition of CeO2 nanoparticles. L. Wang, M. Chen, H. Liu, C. Jiang, V. Ji, F. Moreira, Surface and Coatings Technology, 2017, 331, 196-205

Structure transformation of Ti films deposited on SiC single crystal substrates. L. Li, Y. Liu, X. Mao, L. Zeng, V. Ji, Materials Characterization, 2017, 134, 64-68

Residual stress and microstructure evolution of shot peened Ni-Al bronze at elevated temperatures. C. Wang, C. Jiang, M. Chen, L. Wang, H. Liu, V. Ji, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2017, 707, 629-635

Hot corrosion behavior of Ba2REAlO5 (RE = Dy, Er, Yb) ceramics by vanadium pentoxide at 900–1000°C. C. Zhang, L. Guo, J. Yu, M. Li, F. Ye, V. Ji, Ceramics International, 2017, 43, 11944-11952

Effects of TiO2 doping on the defect chemistry and thermo-physical properties of Yb2O3 stabilized ZrO2. L. Guo, C. Zhang, L. Xu, M. Li, Q. Wang, F. Ye, C. Dan, V. Ji, Journal of the European Ceramic Society, 2017, 37, 4163-4169

Microstructure study of cold rolling nanosized in-situ TiB2 particle reinforced Al composites. C.-Y. Dan, Z. Chen, G. Ji, S.-H. Zhong, Y. Wu, F. Brisset, H.-W. Wang, V. Ji, Materials & Design, 2017, 130, 357-365

Calcium-magnesium-alumina-silicate (CMAS) resistance property of BaLn2Ti3O10 (Ln=La, Nd) for thermal barrier coating applications. L. Guo, M. Li, C. Yang, C. Zhang, L. Xu, F. Ye, C. Dan, V. Ji, Ceramics International, 2017, Volume 43, Issue 13, Pages 10521–10527

Hot corrosion behavior of (Gd0.9Sc0.1)2Zr2O7 in V2O5 molten salt at 700–1000 °C. C. Zhang, M. Li, Y. Zhang, L. Guo, J. Dong, F. Ye, L. Li, V. Ji, Ceramics International, 2017, Volume 43, Pages 9041–9046

Surface mechanical property and residual stress of peened nickel-aluminum bronze determined by in-situ X-ray diffraction. C. Wang, C. Jiang, Y. Zhao, M. Chen, V. Ji, Applied Surface Science, 2017, Volume 420, Pages 28–33

Surface layer characteristics of CNT/Al–Mg–Si alloy composites treated by stress peening. K. Zhu, C. Jiang, V. Ji, Surface and Coatings Technology, 2017, Volume 317, Pages 10–16

Thermal stability of residual stresses and work hardening of shot peened tungsten cemented carbide. C. Wang, C. Jiang, V. Ji, Journal of Materials Processing Technology, 2017, 240, 98-103

Estimation of microstructure and corrosion properties of peened nickel aluminum bronze. C. Wang, C. Jiang, Z. Chai, M. Chen, L. Wang, V. Ji, Surface and Coatings Technology, 2017, 313, 136-142

Residual stress analysis on oxide layers obtained by high temperature oxidation of Chromia-forming alloys. N. Li, J. Xiao, N. Prud'Homme, L. Li, V. Ji, Materials Research Proceedings 2, 2016, pp 365-370

EFFECT OF HEAT TREATMENT ON THE MICROSTRUCTURAL EVOLUTION IN WELD REGION OF 304L PIPELINE STEEL. Z. Boumerzoug, S. Hamza, V. Ji, Journal of Thermal Engineering, 2016, Vol. 2, No. 6, Special Issue 5,, pp. 1017-1022

The half-metallic ferromagnetic characters of (001)-oriented thin films of the double perovskite Pb2FeMoO6. Y. Zhang, L. Duan, V. Ji, Thin Solid Films, 2016, 615, 318-323

The detailed crystal and electronic structures of the cotunnite-type ZrO2. Y. Zhang, L. Duan, V. Ji, Solid State Communications, 2016, 239, 27–31

Numerical analysis and experimental validation on residual stress distribution of titanium matrix composite after shot peening treatment. L. Xie, C. Wang, L. Wang, Z. Wang, C. Jiang, W. Lu, V. Ji, Mechanics of Materials, 2016, 99, 2–8

The detailed crystal and electronic structures of the cotunnite-type ZrO2. Y. Zhang, L. Duan, V. Ji, Solid State Communications, 2016, 239, 27-31

First-principles study of the structural, electronic, and magnetic properties of double perovskite Sr2FeReO6 containing various imperfections. Y. Zhang, L. Duan, V. Ji, K.-W. Xu, Chin. Phys. B, 2016, Vol. 25 Issue (5), 058102

The structural, electronic, and magnetic properties of the stoichiometric (001) surface of double perovskite Sr2FeMoO6. Y. Zhang, V. Ji, K.-W. Xu, Surface and Interface Analysis, 2016, 1040–1047

Microstructure and residual stresses in Ti-6Al-4V alloy pulsed and unpulsed TIG welds. B. Mehdi, R. Badji, V. Ji, B. Allili, D. Bradai, F.-D. Beaume, F. Soulié, Journal of Materials Processing Technology, 2016, 231, 441-448

Characterization on surface mechanical properties of Ti–6Al–4V after shot peening. L. Xie, Y. Wen, K. Zhan, L. Wang, C. Jiang, V. Ji, Journal of Alloys and Compounds, 2016, 666, 65-70

Effect of humidity on high temperature oxidation of AISI 430 stainless steel. N. Li, J. Xiao, N. Prud’Homme, V. Ji, Materials Science Forum, 2015, Vol. 833, pp 165-168

Structural, electronic and magnetic properties of the Si chains doped zigzag AlN nanoribbons. J.-M. Zhang, J. Zhang, K.-W. Xu, V. Ji, Physica E: Low-dimensional Systems and Nanostructures, 2015, 65, 114-119

Finite element analysis of laser shock peening of 2050-T8 aluminum alloy. N. Hfaiedh, P. Peyre, H. Song, I. Popa, V. Ji, V. Vignal, International Journal of Fatigue, 2015, 70, 480-489

Effects of Co contents on the microstructures and properties of electrodeposited NiCo–Al composite coatings. F. Cai, C. Jiang, P. Fu, V. Ji, Applied Surface Science, 2015, 324, 482-489

Two stages for the evolution of crystallite size and texture of electrodeposited Ni–ZrC composite coating. Z. Zhang, C. Jiang, F. Cai, P. Fu, N. Ma, V. Ji, Surface and Coatings Technology, 2015, 261, 122-129

Hydrogen adsorption and storage on palladium-decorated graphene with boron dopants and vacancy defects: A first-principles study. L. Ma, J.-M. Zhang, K.-W. Xu, V. Ji, Physica E: Low-dimensional Systems and Nanostructures, 2015, 66, 40-47

Effects of vertical strain on zigzag graphene nanoribbon with a topological line defect. L.-H. Qu, J.-M. Zhang, K.-W. Xu, V. Ji, Physica E: Low-dimensional Systems and Nanostructures, 2015, 67, 116-120

Effects of Co contents on the microstructures and properties of the electrodeposited NiCo–Zr composite coatings. F. Cai, C. Jiang, Y. Zhao, V. Ji, Materials Research Bulletin, 2015, 65, 195-203

A first-principles study on uniaxial strain effects of nonplanar oxygen-functionalized armchair graphene nanoribbons. L.-H. Qu, J.-M. Zhang, K.-W. Xu, V. Ji, Journal of Alloys and Compounds, 2015, 631, 219-224

Fabrication and characterization of Ni–Zr composite coatings using electrodepositing technique. F. Cai, C. Jiang, Z. Zhang, E. Muttini, P. Fu, Y. Zhao, V. Ji, Journal of Alloys and Compounds, 2015, 635, 73-81

Characterization of the deformation texture after tensile test and cold rolling of a Ti-6Al-4V sheet alloy. B. Mehdi, H. Azzeddine, R. Badji, V. Ji, B. Alili, D. Bradai, IOP Conf. Series: Materials Science and Engineering, 2015, 82, 012018

A first-principles study on gas sensing properties of graphene andPd-doped graphene. L. Ma, J.-M. Zhang, K.-W. Xu, V. Ji, Applied Surface Science, 2015, 343, 121–127

Effects of the defects on the structural, electronic and magnetic properties of Sr2FeMoO6. Y. Zhang, V. Ji, K.-W. Xu, Journal of Alloys and Compounds, 2015, 648, 374-381

Residual stress distribution and microstructure in the friction stir weld of 7075 aluminum alloy. P. Ji, Z. Yang, J. Zhang, L. Zheng, V. Ji, V. Klosek, J Mater Sci, 2015, 50, 7262–7270

Quantitative study of particle size distribution in an in-situ grown Al–TiB2 composite by synchrotron X-ray diffraction and electron microscopy. Y. Tan, Z. Chen, A. Borbélyb, G. Ji, S.-Y. Zhong, D. Schryvers, V. Ji, H.-W. Wang, Materials Characterization, 2015, 102, 131–136

Effects of the defects on the half-metallic characters and magnetic properties in double perovskite Pb2FeMoO6. Y. Zhang, K.-W. Xu, V. Ji, Materials Chemistry and Physics, 2015, 162, 711-723

Study of ion diffusion in oxidation films grown on a model Fe–15%Cr alloy. A. C. S. Sabioni, J. N. V. Souza, V. Ji, F. Jomard, V. B. Trindade, J. F. Carneiro, Solid State Ionics, 2015, 276, 1–8

Residual stress study in oxide scale obtained on high temperature oxidation of AISI 430 stainless steel. N. Li, J. Xiao, N. Prud’Homme, V. Ji, Advanced Materials Research, 2014, Vol. 996, pp 918-923

Structural and electronic properties of copper nanowires inside zigzag carbon nanotubes. Y.-N. Duan, J.-M. Zhang, X.-M. Wei, X.-X. Fan, K.-W. Xu, V. Ji, Physica B: Condensed Matter, 2014, 447, 77-82

Improving SO2 gas sensing properties of graphene by introducing dopant and defect: A first-principles study. X.-Y. Liu, J.-M. Zhang, K.-W. Xu, V. Ji, Applied Surface Science, 2014, 313, 405-410

Synthesis and characterization of Ni–Al–Y2O3 composite coatings with different Y2O3 particle content. F. Cai, C. Jiang, Z. Zhang, V. Ji, Ceramics International, 2014, 40, 15105-15111

Residual stress study in oxide scale obtained on high temperature oxidation of AISI 430 stainless steel. N. Li, J. Xiao, N. Prud'Homme, V. Ji, Advanced Materials Research, 2014, 966, 918-923

Residual stresses in oxide scale formed on Fe–17Cr stainless steel. N. Li, J. Xiao, N. Prud'Homme, Z. Chen, V. Ji, Applied Surface Science, 2014, 316, 108-113

X-Ray Analysis of Residual Stress in Weld Region of X70 Pipeline Steel. Z. Boumerzoug, K. Digheche, V. Ji, Advanced Materials Research, 2014, Vol. 936, 2011-2016

Residual Stress and Microstructures Characterization in Welded Al-Si- 12Cu Alloy. Z. Boumerzoug, C. Bouremel, V. Ji, Advanced Materials Research, 2014, Vol. 856, 201-204

Residual stress and micro-structure of GCr15 steel after multistep shot peening. P. Fu, C. Jiang, Z. Zhang, V. Ji, Surface Engineering, 2014, VOL 30 NO 11, 847-851

Nitrogen and Boron substitutional doped zigzag silicene nanoribbons: Ab initio investigation. L. Ma, J.-M. Zhang, K.-W. Xu, V. Ji, Physica E, 2014, 60, 112–117

Armchair graphene nanoribbos under shear strain. L.-H. Qu, J.-M. Zhang, K.-W. Xu, V. Ji, Physica E, 2014, 60, 156–159

Magnetic properties and possible martensitic transformation in Mn2NiSi and Ni2MnSi Heusler alloys. Q.-L. Fang, J.-M. Zhang, X.-M. Zhao, K.-W. Xu, V. Ji, Journal ofMagnetismandMagneticMaterials, 2014, 362, 42–46

The study of the P doped silicene nanoribbons with first-principles. J.-M. Zhang, W.-T. Song, K.-W. Xu, V. Ji, Computational Materials Science, 2014, 95, 429–434

Effects of the 3d transition metal doping on the structural, electronic, and magnetic properties of BeO nanotubes. J.-M. Zhang, W.-T. Song, H.-H. Li, K.-W. Xu, V. Ji, Chin. Phys. B, 2014, Vol. 23, No. 1, 017103-01/06